Ubiquiti UniFi Access Point WiFi 6 Pro (U6-PRO)
![Ubiquiti UniFi Access Point WiFi 6 Pro (U6-PRO)]()
![Ubiquiti UniFi Access Point WiFi 6 Pro (U6-PRO)]()
Ubiquiti UniFi Access Point WiFi 6 Pro (U6-PRO)
Available:In Stock
£142.92
Ubiquiti UniFi Access Point WiFi 6 Pro (U6-PRO)
The Access Point WiFi 6 Pro (U6-Pro) is a high-performance, dual-band WiFi 6 access point that is ideal for usage in large offices.
Ubiquiti UniFi U6-PRO Key Features
Dual-band WiFi 6 (802.11ax)
5 GHz (4x4 MU-MIMO and OFDMA) band with a 4.8 Gbps throughput rate
2.4 GHz (2x2 MU-MIMO and OFDMA) band with a 573.5 Mbps throughput rate
Operates at full 4x4 MIMO with 160 MHz bandwidth
300+ concurrent client capacity
Guest Traffic Isolation, which enhances wireless network security and lowers traffic congestion
Included universal mounting plate, backing plate, and screw kit
With its 5 GHz (4x4 MIMO) and 2.4 GHz (2x2 MIMO) bands, the U6 Pro can achieve an aggregate throughput rate of up to 5.3 Gbps, allowing it to accommodate over 300 concurrently connected clients while ensuring an even, dependable wireless experience throughout your entire network. It can also isolate your guest traffic for maximum security and performance. The U6 Pro also supports full 4x4 MIMO with 160 MHz channels, resulting in high-capacity wireless uplinks and quicker data transfer. The UniFi Network application* allows it to be set up in minutes and completely managed.
Ubiquiti UniFi U6-PRO - Technical Specifications
Mechanical
Dimensions: Ø197 x 35 mm (Ø7.76 x 1.38")
Weight Without mount: 460 g (1.01 lb)
With mount: 600 g (1.32 lb)
Enclosure material: Plastic
Mounting material: SGCC steel
Weatherproofing: IP54
Hardware
Management interfaces: Ethernet, Bluetooth
Networking interface: (1) GbE RJ45 port
Button: Factory reset
LED*: White/blue
Power method: 802.3at PoE+
Power supply: UniFi PoE switch, 48V, 0.5A PoE adapter (not included)
Supported voltage range: 44 to 57VDC
Max. power consumption: 13W
Max. TX power: 2.4 GHz, 22 dBm / 5 GHz, 26 dBm
MIMO: 2.4 GHz, 2 x 2 (UL MU-MIMO) / 5 GHz, 4 x 4 (DL/UL MU-MIMO)
Throughput rate: 2.4 GHz, 573.5 Mbps / 5 GHz, 4.8 Gbps
Antenna gain: 2.4 GHz, 4 dBi / 5 GHz, 6 dBi
Mounting: Wall/ceiling (included)
Operating temperature: -30 to 60° C (-22 to 140° F)
Operating humidity: 5 - 95% noncondensing
Certifications: CE, FCC, IC
*Due to chip supply shortages, the U6 AP's LED has been limited to only white and blue color modes.
Software
WiFi standards: 802.11a/b/g
WiFi: 4/WiFi 5/WiFi 6
Wireless security: WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
BSSID: 8 per radio
VLAN: 802.1Q
Advanced QoS: Per-user rate limiting
Guest traffic isolation: Supported
Concurrent clients: 300+
Zero wait DFS: Yes*
*Supported with upcoming firmware versions
Supported Data Rates (MBPS)
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b 1, 2, 5.5, 11 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n (WiFi 4) 6.5 Mbps to 600 Mbps (MCS0 - MCS31, HT 20/40)
802.11ac (WiFi 5) 6.5 Mbps to 3.4 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160)
802.11ax (WiFi 6) 7.3 Mbps to 4.8 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160)
The Access Point WiFi 6 Pro (U6-Pro) is a high-performance, dual-band WiFi 6 access point that is ideal for usage in large offices.
Ubiquiti UniFi U6-PRO Key Features
Dual-band WiFi 6 (802.11ax)
5 GHz (4x4 MU-MIMO and OFDMA) band with a 4.8 Gbps throughput rate
2.4 GHz (2x2 MU-MIMO and OFDMA) band with a 573.5 Mbps throughput rate
Operates at full 4x4 MIMO with 160 MHz bandwidth
300+ concurrent client capacity
Guest Traffic Isolation, which enhances wireless network security and lowers traffic congestion
Included universal mounting plate, backing plate, and screw kit
With its 5 GHz (4x4 MIMO) and 2.4 GHz (2x2 MIMO) bands, the U6 Pro can achieve an aggregate throughput rate of up to 5.3 Gbps, allowing it to accommodate over 300 concurrently connected clients while ensuring an even, dependable wireless experience throughout your entire network. It can also isolate your guest traffic for maximum security and performance. The U6 Pro also supports full 4x4 MIMO with 160 MHz channels, resulting in high-capacity wireless uplinks and quicker data transfer. The UniFi Network application* allows it to be set up in minutes and completely managed.
Ubiquiti UniFi U6-PRO - Technical Specifications
Mechanical
Dimensions: Ø197 x 35 mm (Ø7.76 x 1.38")
Weight Without mount: 460 g (1.01 lb)
With mount: 600 g (1.32 lb)
Enclosure material: Plastic
Mounting material: SGCC steel
Weatherproofing: IP54
Hardware
Management interfaces: Ethernet, Bluetooth
Networking interface: (1) GbE RJ45 port
Button: Factory reset
LED*: White/blue
Power method: 802.3at PoE+
Power supply: UniFi PoE switch, 48V, 0.5A PoE adapter (not included)
Supported voltage range: 44 to 57VDC
Max. power consumption: 13W
Max. TX power: 2.4 GHz, 22 dBm / 5 GHz, 26 dBm
MIMO: 2.4 GHz, 2 x 2 (UL MU-MIMO) / 5 GHz, 4 x 4 (DL/UL MU-MIMO)
Throughput rate: 2.4 GHz, 573.5 Mbps / 5 GHz, 4.8 Gbps
Antenna gain: 2.4 GHz, 4 dBi / 5 GHz, 6 dBi
Mounting: Wall/ceiling (included)
Operating temperature: -30 to 60° C (-22 to 140° F)
Operating humidity: 5 - 95% noncondensing
Certifications: CE, FCC, IC
*Due to chip supply shortages, the U6 AP's LED has been limited to only white and blue color modes.
Software
WiFi standards: 802.11a/b/g
WiFi: 4/WiFi 5/WiFi 6
Wireless security: WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
BSSID: 8 per radio
VLAN: 802.1Q
Advanced QoS: Per-user rate limiting
Guest traffic isolation: Supported
Concurrent clients: 300+
Zero wait DFS: Yes*
*Supported with upcoming firmware versions
Supported Data Rates (MBPS)
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b 1, 2, 5.5, 11 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n (WiFi 4) 6.5 Mbps to 600 Mbps (MCS0 - MCS31, HT 20/40)
802.11ac (WiFi 5) 6.5 Mbps to 3.4 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160)
802.11ax (WiFi 6) 7.3 Mbps to 4.8 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160)
Ubiquiti UniFi Access Point WiFi 6 Pro (U6-PRO)
The Access Point WiFi 6 Pro (U6-Pro) is a high-performance, dual-band WiFi 6 access point that is ideal for usage in large offices.
Ubiquiti UniFi U6-PRO Key Features
Dual-band WiFi 6 (802.11ax)
5 GHz (4x4 MU-MIMO and OFDMA) band with a 4.8 Gbps throughput rate
2.4 GHz (2x2 MU-MIMO and OFDMA) band with a 573.5 Mbps throughput rate
Operates at full 4x4 MIMO with 160 MHz bandwidth
300+ concurrent client capacity
Guest Traffic Isolation, which enhances wireless network security and lowers traffic congestion
Included universal mounting plate, backing plate, and screw kit
With its 5 GHz (4x4 MIMO) and 2.4 GHz (2x2 MIMO) bands, the U6 Pro can achieve an aggregate throughput rate of up to 5.3 Gbps, allowing it to accommodate over 300 concurrently connected clients while ensuring an even, dependable wireless experience throughout your entire network. It can also isolate your guest traffic for maximum security and performance. The U6 Pro also supports full 4x4 MIMO with 160 MHz channels, resulting in high-capacity wireless uplinks and quicker data transfer. The UniFi Network application* allows it to be set up in minutes and completely managed.
Ubiquiti UniFi U6-PRO - Technical Specifications
Mechanical
Dimensions: Ø197 x 35 mm (Ø7.76 x 1.38")
Weight Without mount: 460 g (1.01 lb)
With mount: 600 g (1.32 lb)
Enclosure material: Plastic
Mounting material: SGCC steel
Weatherproofing: IP54
Hardware
Management interfaces: Ethernet, Bluetooth
Networking interface: (1) GbE RJ45 port
Button: Factory reset
LED*: White/blue
Power method: 802.3at PoE+
Power supply: UniFi PoE switch, 48V, 0.5A PoE adapter (not included)
Supported voltage range: 44 to 57VDC
Max. power consumption: 13W
Max. TX power: 2.4 GHz, 22 dBm / 5 GHz, 26 dBm
MIMO: 2.4 GHz, 2 x 2 (UL MU-MIMO) / 5 GHz, 4 x 4 (DL/UL MU-MIMO)
Throughput rate: 2.4 GHz, 573.5 Mbps / 5 GHz, 4.8 Gbps
Antenna gain: 2.4 GHz, 4 dBi / 5 GHz, 6 dBi
Mounting: Wall/ceiling (included)
Operating temperature: -30 to 60° C (-22 to 140° F)
Operating humidity: 5 - 95% noncondensing
Certifications: CE, FCC, IC
*Due to chip supply shortages, the U6 AP's LED has been limited to only white and blue color modes.
Software
WiFi standards: 802.11a/b/g
WiFi: 4/WiFi 5/WiFi 6
Wireless security: WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
BSSID: 8 per radio
VLAN: 802.1Q
Advanced QoS: Per-user rate limiting
Guest traffic isolation: Supported
Concurrent clients: 300+
Zero wait DFS: Yes*
*Supported with upcoming firmware versions
Supported Data Rates (MBPS)
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b 1, 2, 5.5, 11 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n (WiFi 4) 6.5 Mbps to 600 Mbps (MCS0 - MCS31, HT 20/40)
802.11ac (WiFi 5) 6.5 Mbps to 3.4 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160)
802.11ax (WiFi 6) 7.3 Mbps to 4.8 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160)
The Access Point WiFi 6 Pro (U6-Pro) is a high-performance, dual-band WiFi 6 access point that is ideal for usage in large offices.
Ubiquiti UniFi U6-PRO Key Features
Dual-band WiFi 6 (802.11ax)
5 GHz (4x4 MU-MIMO and OFDMA) band with a 4.8 Gbps throughput rate
2.4 GHz (2x2 MU-MIMO and OFDMA) band with a 573.5 Mbps throughput rate
Operates at full 4x4 MIMO with 160 MHz bandwidth
300+ concurrent client capacity
Guest Traffic Isolation, which enhances wireless network security and lowers traffic congestion
Included universal mounting plate, backing plate, and screw kit
With its 5 GHz (4x4 MIMO) and 2.4 GHz (2x2 MIMO) bands, the U6 Pro can achieve an aggregate throughput rate of up to 5.3 Gbps, allowing it to accommodate over 300 concurrently connected clients while ensuring an even, dependable wireless experience throughout your entire network. It can also isolate your guest traffic for maximum security and performance. The U6 Pro also supports full 4x4 MIMO with 160 MHz channels, resulting in high-capacity wireless uplinks and quicker data transfer. The UniFi Network application* allows it to be set up in minutes and completely managed.
Ubiquiti UniFi U6-PRO - Technical Specifications
Mechanical
Dimensions: Ø197 x 35 mm (Ø7.76 x 1.38")
Weight Without mount: 460 g (1.01 lb)
With mount: 600 g (1.32 lb)
Enclosure material: Plastic
Mounting material: SGCC steel
Weatherproofing: IP54
Hardware
Management interfaces: Ethernet, Bluetooth
Networking interface: (1) GbE RJ45 port
Button: Factory reset
LED*: White/blue
Power method: 802.3at PoE+
Power supply: UniFi PoE switch, 48V, 0.5A PoE adapter (not included)
Supported voltage range: 44 to 57VDC
Max. power consumption: 13W
Max. TX power: 2.4 GHz, 22 dBm / 5 GHz, 26 dBm
MIMO: 2.4 GHz, 2 x 2 (UL MU-MIMO) / 5 GHz, 4 x 4 (DL/UL MU-MIMO)
Throughput rate: 2.4 GHz, 573.5 Mbps / 5 GHz, 4.8 Gbps
Antenna gain: 2.4 GHz, 4 dBi / 5 GHz, 6 dBi
Mounting: Wall/ceiling (included)
Operating temperature: -30 to 60° C (-22 to 140° F)
Operating humidity: 5 - 95% noncondensing
Certifications: CE, FCC, IC
*Due to chip supply shortages, the U6 AP's LED has been limited to only white and blue color modes.
Software
WiFi standards: 802.11a/b/g
WiFi: 4/WiFi 5/WiFi 6
Wireless security: WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
BSSID: 8 per radio
VLAN: 802.1Q
Advanced QoS: Per-user rate limiting
Guest traffic isolation: Supported
Concurrent clients: 300+
Zero wait DFS: Yes*
*Supported with upcoming firmware versions
Supported Data Rates (MBPS)
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b 1, 2, 5.5, 11 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n (WiFi 4) 6.5 Mbps to 600 Mbps (MCS0 - MCS31, HT 20/40)
802.11ac (WiFi 5) 6.5 Mbps to 3.4 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160)
802.11ax (WiFi 6) 7.3 Mbps to 4.8 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160)
