Sangoma Vega 400G, 4 T1/E1, failover, 120 VoIP channels VEGA-4NG-120
Sangoma Vega 400G, 4 T1/E1, failover, 120 VoIP channels
The Sangoma Vega 400G, 4 T1/E1, failover, 120 VoIP channels lets you easily connect digital telephony equipment to IP networks.
Sangoma Vega 400G, 4 T1/E1, failover, 120 VoIP channels Features
- 90 VoIP calls
- Supports dual gigabit Ethernet connections
- Local survivability
- Voice, FAX and modem support
- Flexible call routing for fallback and least cost routing
- Emergency PSTN backup
- Interoperability with a wide range of legacy and IP equipment.
Sangoma’s next generation Vega VoIP gateways are the easiest to provision on the market. It’s a SNAP with the Sangoma Network Appliance Provisioning tool. Keep the configuration of existing equipment; the Vega 400G delivers flexibility and choice when it comes to call routing. Each T1/E1 interface can be set up to connect to a network or a terminal side – e.g. directly to the PSTN or straight to your PBX.
ONCE CONNECTED, STAY CONNECTEDIn the event of a WAN failure, IP phones behind the gateway can continue to call each other, be routed to a backup switch or connect directly to the PSTN. Plus, the Vega 400G comes complete with a pin switching and set of bypass T1/E1 connectors that don’t rely on cross-over cables. The next generation 400G is perfect for redundancy or failover scenarios.
OPEN, NON-PROPRIETARY INTERFACESThe Vega 400G VEGA-4NG-120 supports the following signalling schemes:
- ETSI, VN4, ISDN
- NI1, NI2, AT&T 5ESS, DMS100
- ISO QSIG Basic Call and QSIG Feature Transparency
- Channel Associated Signalling (CAS)
- R2 MFC
VoIP Interfaces
- SIP – for H.323, please inquire
- Audio codecs:
- G.711 (a-law/µ-law) (64 kbps)
- G.729a (8 kbps)
- G.723.1 (5.3/6.4 kbps)
- G.726
- FAX Support – up to G3 FAX, using T.38
- Modem Support – up to V.90, using G.711
- Up to 120 VoIP channels
Telephony Interfaces
Primary Rate ISDN (User configurable NT/TE):
E1
- Euro–ISDN
- ISO QSIG
- VN4
- CAS R2MFC
- CAS Private Wire
T1
- NI1/NI2
- AT&T 5ESS
- DMS100
- CAS (RBS)
- ISO QSIG
- CAS Private Wire
LAN Interfaces
- 2 RJ–45s, 1000 BaseT/100 BaseTX/10 BaseT, full/half duplex
Features
Identification
- Caller ID presentation
- Caller ID screening allows connections to be accepted only from selected call sources
- SIP Registration & Digest Authentication
Operations, Maintenance & Billing
- HTTP(S) web server
- RADIUS Accounting & Login
- Remote firmware upgrade:
- Auto code upgrade
- Auto configuration upgrade
- SNMP V1, V2 & V3
- TFTP/FTP support
- VT100 – RS232
Routing & Numbering
- Dial Planner – sophisticated call routing capabilities, standalone or gatekeeper/proxy integration
- Direct Dialing In (DDI)
- SIP registration to multiple proxies
- NAT traversal
Security & Encryption
- Management – HTTPS, SSH, Telnet
- Configurable user login passwords
- SIP/TLS and SRTP
Call Quality
- Adaptive jitter removal
- Comfort noise generation
- Silence suppression
- 802.1p/Q VLAN tagging
- Differentiated Services (DiffServ)
- Type of Service (ToS)
- QoS statistics reporting
- Echo cancellation (G.168 up to 128ms)
Hardware
Certification
- EN55022
- EN55024
- FCC Part 15
- AS/NZS3548
- VCCI
- EN60950
- IEC60950
- UL60950
- AS/NZS60950
- E1: TBR4
- T1: FCC Part 68
- T1: CS-03
Environmental
- 0° .. 40°C
- 0% .. 90% humidity (non-condensing)
Indicators
LED:
- Power
- ISDN: NT/TE & Link up
- LAN: Speed, Activity
Physical Dimensions
- 437mm (17.2″) wide x 153mm (6″) deep x 43.5mm (1.7″) high
- Weight: 1.97kgs (4.35lbs)
- Rackmount brackets supplied
Power
- 100..240 VAC, 47..63 Hz, 1..0.5 A
Program Storage
- Code & configuration data are stored in FLASH & executed from RAM
Sangoma Vega 400G, 4 T1/E1, failover, 120 VoIP channels
The Sangoma Vega 400G, 4 T1/E1, failover, 120 VoIP channels lets you easily connect digital telephony equipment to IP networks.
Sangoma Vega 400G, 4 T1/E1, failover, 120 VoIP channels Features
- 90 VoIP calls
- Supports dual gigabit Ethernet connections
- Local survivability
- Voice, FAX and modem support
- Flexible call routing for fallback and least cost routing
- Emergency PSTN backup
- Interoperability with a wide range of legacy and IP equipment.
Sangoma’s next generation Vega VoIP gateways are the easiest to provision on the market. It’s a SNAP with the Sangoma Network Appliance Provisioning tool. Keep the configuration of existing equipment; the Vega 400G delivers flexibility and choice when it comes to call routing. Each T1/E1 interface can be set up to connect to a network or a terminal side – e.g. directly to the PSTN or straight to your PBX.
ONCE CONNECTED, STAY CONNECTEDIn the event of a WAN failure, IP phones behind the gateway can continue to call each other, be routed to a backup switch or connect directly to the PSTN. Plus, the Vega 400G comes complete with a pin switching and set of bypass T1/E1 connectors that don’t rely on cross-over cables. The next generation 400G is perfect for redundancy or failover scenarios.
OPEN, NON-PROPRIETARY INTERFACESThe Vega 400G VEGA-4NG-120 supports the following signalling schemes:
- ETSI, VN4, ISDN
- NI1, NI2, AT&T 5ESS, DMS100
- ISO QSIG Basic Call and QSIG Feature Transparency
- Channel Associated Signalling (CAS)
- R2 MFC
VoIP Interfaces
- SIP – for H.323, please inquire
- Audio codecs:
- G.711 (a-law/µ-law) (64 kbps)
- G.729a (8 kbps)
- G.723.1 (5.3/6.4 kbps)
- G.726
- FAX Support – up to G3 FAX, using T.38
- Modem Support – up to V.90, using G.711
- Up to 120 VoIP channels
Telephony Interfaces
Primary Rate ISDN (User configurable NT/TE):
E1
- Euro–ISDN
- ISO QSIG
- VN4
- CAS R2MFC
- CAS Private Wire
T1
- NI1/NI2
- AT&T 5ESS
- DMS100
- CAS (RBS)
- ISO QSIG
- CAS Private Wire
LAN Interfaces
- 2 RJ–45s, 1000 BaseT/100 BaseTX/10 BaseT, full/half duplex
Features
Identification
- Caller ID presentation
- Caller ID screening allows connections to be accepted only from selected call sources
- SIP Registration & Digest Authentication
Operations, Maintenance & Billing
- HTTP(S) web server
- RADIUS Accounting & Login
- Remote firmware upgrade:
- Auto code upgrade
- Auto configuration upgrade
- SNMP V1, V2 & V3
- TFTP/FTP support
- VT100 – RS232
Routing & Numbering
- Dial Planner – sophisticated call routing capabilities, standalone or gatekeeper/proxy integration
- Direct Dialing In (DDI)
- SIP registration to multiple proxies
- NAT traversal
Security & Encryption
- Management – HTTPS, SSH, Telnet
- Configurable user login passwords
- SIP/TLS and SRTP
Call Quality
- Adaptive jitter removal
- Comfort noise generation
- Silence suppression
- 802.1p/Q VLAN tagging
- Differentiated Services (DiffServ)
- Type of Service (ToS)
- QoS statistics reporting
- Echo cancellation (G.168 up to 128ms)
Hardware
Certification
EMC (ClassB)- EN55022
- EN55024
- FCC Part 15
- AS/NZS3548
- VCCI
- EN60950
- IEC60950
- UL60950
- AS/NZS60950
- E1: TBR4
- T1: FCC Part 68
- T1: CS-03
Environmental
- 0° .. 40°C
- 0% .. 90% humidity (non-condensing)
Indicators
LED:
- Power
- ISDN: NT/TE & Link up
- LAN: Speed, Activity
Physical Dimensions
- 437mm (17.2″) wide x 153mm (6″) deep x 43.5mm (1.7″) high
- Weight: 1.97kgs (4.35lbs)
- Rackmount brackets supplied
Power
- 100..240 VAC, 47..63 Hz, 1..0.5 A
Program Storage
- Code & configuration data are stored in FLASH & executed from RAM
