Ubiquiti UniFi UAP-AC-IW In-Wall Access Point (5 Pack)
Ubiquiti UniFi UAP-AC-IW-5 In-Wall Access Point (5 Pack)
The Ubiquiti UniFi UAP-AC-IW-5 is a five pack of the UniFi AC In-Wall Access Point. These discreet units transform an Ethernet wall connection into a dual-band 802.11AC WiFi Access Point. The UAP-AC-IW features two Gigabit Ethernet ports, one of which delivers PoE to power and connect an 802.3af device to the network.
Ubiquiti UniFi UAP-AC-IW Key Features
- 802.11AC WiFi
- Two Gigabit Ethernet ports
- 300 Mbps at 2.4GHz
- 867 Mbps at 5GHz
- 100m Range
The UniFi AC In-Wall AP provides simultaneous, dual-band, 2x2 MIMO technology and is available in single and five packs (PoE adapters not included).
General
- Dimensions 139.7 x 86.7 x 25.75 mm (5.5 x 3.41 x 1.01")
- Weight 200 g (6.43 oz)
- Networking Interface (3) 10/100/1000 Ethernet Ports
- Buttons Reset
- Power Method Passive Power over Ethernet (48V),
- 803.2at Supported
- (Supported Voltage Range: 44 to 57VDC)
- Power Supply UniFi Switch (PoE)
- Power Save Supported
- PoE Out 48V Pass-Through (Pins 1, 2+; 3, 6-)
- Maximum Power Consumption 7W
- Maximum TX Power
2.4 GHz
5 GHz
20 dBm
20 dBm - Antennas
2.4 GHz
5 GHz
(1) Dual-Band Antenna, Single-Polarity
1 dBi
2 dBi - Wi-Fi Standards 802.11 a/b/g/n/ac
- Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
- BSSID Up to Four per Radio
- Mounting 1-Gang Electrical Wall Box (Not Included)
- Operating Temperature -10 to 50° C (14 to 122° F)
- Operating Humidity 5 to 95% Noncondensing
- Certifications CE, FCC, IC
Advanced Traffic Management
- VLAN 802.1Q
- Advanced QoS Per-User Rate Limiting
- Guest Traffic Isolation Supported
- WMM Voice, Video, Best Effort, and Background
- Concurrent Clients 250+
Supported Data Rates (Mbps)
- Standard Data Rates
- 802.11ac 6.5 Mbps to 867 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80)
- 802.11n 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40)
- 802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- 802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- 802.11b 1, 2, 5.5, 11 Mbps
Ubiquiti UniFi UAP-AC-IW-5 In-Wall Access Point (5 Pack)
The Ubiquiti UniFi UAP-AC-IW-5 is a five pack of the UniFi AC In-Wall Access Point. These discreet units transform an Ethernet wall connection into a dual-band 802.11AC WiFi Access Point. The UAP-AC-IW features two Gigabit Ethernet ports, one of which delivers PoE to power and connect an 802.3af device to the network.
Ubiquiti UniFi UAP-AC-IW Key Features
- 802.11AC WiFi
- Two Gigabit Ethernet ports
- 300 Mbps at 2.4GHz
- 867 Mbps at 5GHz
- 100m Range
The UniFi AC In-Wall AP provides simultaneous, dual-band, 2x2 MIMO technology and is available in single and five packs (PoE adapters not included).
General
- Dimensions 139.7 x 86.7 x 25.75 mm (5.5 x 3.41 x 1.01")
- Weight 200 g (6.43 oz)
- Networking Interface (3) 10/100/1000 Ethernet Ports
- Buttons Reset
- Power Method Passive Power over Ethernet (48V),
- 803.2at Supported
- (Supported Voltage Range: 44 to 57VDC)
- Power Supply UniFi Switch (PoE)
- Power Save Supported
- PoE Out 48V Pass-Through (Pins 1, 2+; 3, 6-)
- Maximum Power Consumption 7W
- Maximum TX Power
2.4 GHz
5 GHz
20 dBm
20 dBm - Antennas
2.4 GHz
5 GHz
(1) Dual-Band Antenna, Single-Polarity
1 dBi
2 dBi - Wi-Fi Standards 802.11 a/b/g/n/ac
- Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
- BSSID Up to Four per Radio
- Mounting 1-Gang Electrical Wall Box (Not Included)
- Operating Temperature -10 to 50° C (14 to 122° F)
- Operating Humidity 5 to 95% Noncondensing
- Certifications CE, FCC, IC
Advanced Traffic Management
- VLAN 802.1Q
- Advanced QoS Per-User Rate Limiting
- Guest Traffic Isolation Supported
- WMM Voice, Video, Best Effort, and Background
- Concurrent Clients 250+
Supported Data Rates (Mbps)
- Standard Data Rates
- 802.11ac 6.5 Mbps to 867 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80)
- 802.11n 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40)
- 802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- 802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- 802.11b 1, 2, 5.5, 11 Mbps
