MikroTik netFiber 9 Outdoor Fibre Switch (CRS310-1G-5S-4S+OUT)
![MikroTik netFiber 9 Outdoor Fibre Switch (CRS310-1G-5S-4S+OUT)]()
![MikroTik netFiber 9 Outdoor Fibre Switch (CRS310-1G-5S-4S+OUT)]()
MikroTik netFiber 9 Outdoor Fibre Switch (CRS310-1G-5S-4S+OUT)
Available:In Stock
£206.52
MikroTik netFiber 9 Outdoor Fibre Switch (CRS310-1G-5S-4S+OUT)
The netFiber 9 is a robust outdoor switch that includes SFP, SFP+, and Gigabit Ethernet ports. It has an ARM v7 CPU, 256 MB of RAM, 4x 10G SFP+ ports, and a Marvell switch-chip that can handle even the most demanding loads. The Gigabit Ethernet port is used for more than just management. It connects directly to the switch chip, allowing for full gigabit speeds. This port also supports PoE-in, which means you won't have to rely on the DC jack for powering in tight, difficult-to-reach spots.
For that sweet 10 Gbps networking, there's a console port, followed by five regular SFP ports and four SFP+ ports. This implies you'll probably have a lot of cables to manage at some point. That's why we included some useful extra features on the bottom of the case to help you keep things neat and tidy.
In dusty environments with occasional splashes of water, the robust case provides considerable protection.On the back, there's a large heatsink that serves two purposes.With all of the mounting choices, it not only provides excellent heat dissipation, but it also pushes the centre of mass to the side, keeping the board firm and strong throughout installation.Metal hose clamps and screws are included in the packaging, allowing you to quickly attach the netFiber to a pole, wall, or mast.
netFiber 9 is a fantastic tool for anyone who has to work with connections longer than 100 metres while minimising data loss and ping. If you're concerned about electromagnetic interference, tampering, or eavesdropping, optical fibre can be a great alternative to copper. NetFiber 9 is a real bargain with 10 ports, a strong CPU, and a rugged case that will make network management a breeze!
MikroTik netFiber 9 Outdoor Fibre Switch Key Features
Multiple Powering Options
IP54 Rated Outdoor Enclosure
Light Routing Capabilities
MikroTik netFiber 9 Outdoor Fibre Switch - Technical Specifications
General
Product code: CRS310-1G-5S-4S+OUT
Architecture: ARM 32bit
CPU: 98DX226S
CPU core count: 1
CPU nominal frequency: 800 MHz
RouterOS license: 5
Operating System: RouterOS
Size of RAM 256 MB
Storage size: 16 MB
Storage type: FLASH
MTBF: Approximately 200'000 hours at 25C
Tested ambient temperature: -40°C to 70°C
CPU temperature monitor: Yes
Voltage Monitor: Yes
Powering
Number of DC inputs: 2 (PoE-IN, DC jack)
DC jack input Voltage: 18-57 V
Max power consumption: 16.3 W
Max power consumption without attachments: 10 W
FAN count: Passive
PoE in: 802.3af/at
PoE in input Voltage: 18-57 V
Ethernet
10/100/1000 Ethernet ports: 1
Fiber
SFP ports: 5
SFP+ ports: 4
Certifications
Certification: CE, EAC, ROHS
IP: IP54
Package Contents
48 V 0.95 A power adapter
Gigabit PoE injector
K-66 fastening set
Hose clamp 2:
The netFiber 9 is a robust outdoor switch that includes SFP, SFP+, and Gigabit Ethernet ports. It has an ARM v7 CPU, 256 MB of RAM, 4x 10G SFP+ ports, and a Marvell switch-chip that can handle even the most demanding loads. The Gigabit Ethernet port is used for more than just management. It connects directly to the switch chip, allowing for full gigabit speeds. This port also supports PoE-in, which means you won't have to rely on the DC jack for powering in tight, difficult-to-reach spots.
For that sweet 10 Gbps networking, there's a console port, followed by five regular SFP ports and four SFP+ ports. This implies you'll probably have a lot of cables to manage at some point. That's why we included some useful extra features on the bottom of the case to help you keep things neat and tidy.
In dusty environments with occasional splashes of water, the robust case provides considerable protection.On the back, there's a large heatsink that serves two purposes.With all of the mounting choices, it not only provides excellent heat dissipation, but it also pushes the centre of mass to the side, keeping the board firm and strong throughout installation.Metal hose clamps and screws are included in the packaging, allowing you to quickly attach the netFiber to a pole, wall, or mast.
netFiber 9 is a fantastic tool for anyone who has to work with connections longer than 100 metres while minimising data loss and ping. If you're concerned about electromagnetic interference, tampering, or eavesdropping, optical fibre can be a great alternative to copper. NetFiber 9 is a real bargain with 10 ports, a strong CPU, and a rugged case that will make network management a breeze!
MikroTik netFiber 9 Outdoor Fibre Switch Key Features
Multiple Powering Options
IP54 Rated Outdoor Enclosure
Light Routing Capabilities
MikroTik netFiber 9 Outdoor Fibre Switch - Technical Specifications
General
Product code: CRS310-1G-5S-4S+OUT
Architecture: ARM 32bit
CPU: 98DX226S
CPU core count: 1
CPU nominal frequency: 800 MHz
RouterOS license: 5
Operating System: RouterOS
Size of RAM 256 MB
Storage size: 16 MB
Storage type: FLASH
MTBF: Approximately 200'000 hours at 25C
Tested ambient temperature: -40°C to 70°C
CPU temperature monitor: Yes
Voltage Monitor: Yes
Powering
Number of DC inputs: 2 (PoE-IN, DC jack)
DC jack input Voltage: 18-57 V
Max power consumption: 16.3 W
Max power consumption without attachments: 10 W
FAN count: Passive
PoE in: 802.3af/at
PoE in input Voltage: 18-57 V
Ethernet
10/100/1000 Ethernet ports: 1
Fiber
SFP ports: 5
SFP+ ports: 4
Certifications
Certification: CE, EAC, ROHS
IP: IP54
Package Contents
48 V 0.95 A power adapter
Gigabit PoE injector
K-66 fastening set
Hose clamp 2:
MikroTik netFiber 9 Outdoor Fibre Switch (CRS310-1G-5S-4S+OUT)
The netFiber 9 is a robust outdoor switch that includes SFP, SFP+, and Gigabit Ethernet ports. It has an ARM v7 CPU, 256 MB of RAM, 4x 10G SFP+ ports, and a Marvell switch-chip that can handle even the most demanding loads. The Gigabit Ethernet port is used for more than just management. It connects directly to the switch chip, allowing for full gigabit speeds. This port also supports PoE-in, which means you won't have to rely on the DC jack for powering in tight, difficult-to-reach spots.
For that sweet 10 Gbps networking, there's a console port, followed by five regular SFP ports and four SFP+ ports. This implies you'll probably have a lot of cables to manage at some point. That's why we included some useful extra features on the bottom of the case to help you keep things neat and tidy.
In dusty environments with occasional splashes of water, the robust case provides considerable protection.On the back, there's a large heatsink that serves two purposes.With all of the mounting choices, it not only provides excellent heat dissipation, but it also pushes the centre of mass to the side, keeping the board firm and strong throughout installation.Metal hose clamps and screws are included in the packaging, allowing you to quickly attach the netFiber to a pole, wall, or mast.
netFiber 9 is a fantastic tool for anyone who has to work with connections longer than 100 metres while minimising data loss and ping. If you're concerned about electromagnetic interference, tampering, or eavesdropping, optical fibre can be a great alternative to copper. NetFiber 9 is a real bargain with 10 ports, a strong CPU, and a rugged case that will make network management a breeze!
MikroTik netFiber 9 Outdoor Fibre Switch Key Features
Multiple Powering Options
IP54 Rated Outdoor Enclosure
Light Routing Capabilities
MikroTik netFiber 9 Outdoor Fibre Switch - Technical Specifications
General
Product code: CRS310-1G-5S-4S+OUT
Architecture: ARM 32bit
CPU: 98DX226S
CPU core count: 1
CPU nominal frequency: 800 MHz
RouterOS license: 5
Operating System: RouterOS
Size of RAM 256 MB
Storage size: 16 MB
Storage type: FLASH
MTBF: Approximately 200'000 hours at 25C
Tested ambient temperature: -40°C to 70°C
CPU temperature monitor: Yes
Voltage Monitor: Yes
Powering
Number of DC inputs: 2 (PoE-IN, DC jack)
DC jack input Voltage: 18-57 V
Max power consumption: 16.3 W
Max power consumption without attachments: 10 W
FAN count: Passive
PoE in: 802.3af/at
PoE in input Voltage: 18-57 V
Ethernet
10/100/1000 Ethernet ports: 1
Fiber
SFP ports: 5
SFP+ ports: 4
Certifications
Certification: CE, EAC, ROHS
IP: IP54
Package Contents
48 V 0.95 A power adapter
Gigabit PoE injector
K-66 fastening set
Hose clamp 2:
The netFiber 9 is a robust outdoor switch that includes SFP, SFP+, and Gigabit Ethernet ports. It has an ARM v7 CPU, 256 MB of RAM, 4x 10G SFP+ ports, and a Marvell switch-chip that can handle even the most demanding loads. The Gigabit Ethernet port is used for more than just management. It connects directly to the switch chip, allowing for full gigabit speeds. This port also supports PoE-in, which means you won't have to rely on the DC jack for powering in tight, difficult-to-reach spots.
For that sweet 10 Gbps networking, there's a console port, followed by five regular SFP ports and four SFP+ ports. This implies you'll probably have a lot of cables to manage at some point. That's why we included some useful extra features on the bottom of the case to help you keep things neat and tidy.
In dusty environments with occasional splashes of water, the robust case provides considerable protection.On the back, there's a large heatsink that serves two purposes.With all of the mounting choices, it not only provides excellent heat dissipation, but it also pushes the centre of mass to the side, keeping the board firm and strong throughout installation.Metal hose clamps and screws are included in the packaging, allowing you to quickly attach the netFiber to a pole, wall, or mast.
netFiber 9 is a fantastic tool for anyone who has to work with connections longer than 100 metres while minimising data loss and ping. If you're concerned about electromagnetic interference, tampering, or eavesdropping, optical fibre can be a great alternative to copper. NetFiber 9 is a real bargain with 10 ports, a strong CPU, and a rugged case that will make network management a breeze!
MikroTik netFiber 9 Outdoor Fibre Switch Key Features
Multiple Powering Options
IP54 Rated Outdoor Enclosure
Light Routing Capabilities
MikroTik netFiber 9 Outdoor Fibre Switch - Technical Specifications
General
Product code: CRS310-1G-5S-4S+OUT
Architecture: ARM 32bit
CPU: 98DX226S
CPU core count: 1
CPU nominal frequency: 800 MHz
RouterOS license: 5
Operating System: RouterOS
Size of RAM 256 MB
Storage size: 16 MB
Storage type: FLASH
MTBF: Approximately 200'000 hours at 25C
Tested ambient temperature: -40°C to 70°C
CPU temperature monitor: Yes
Voltage Monitor: Yes
Powering
Number of DC inputs: 2 (PoE-IN, DC jack)
DC jack input Voltage: 18-57 V
Max power consumption: 16.3 W
Max power consumption without attachments: 10 W
FAN count: Passive
PoE in: 802.3af/at
PoE in input Voltage: 18-57 V
Ethernet
10/100/1000 Ethernet ports: 1
Fiber
SFP ports: 5
SFP+ ports: 4
Certifications
Certification: CE, EAC, ROHS
IP: IP54
Package Contents
48 V 0.95 A power adapter
Gigabit PoE injector
K-66 fastening set
Hose clamp 2:
