Ubiquiti UniFi AP WiFi 6 Mesh Access Point (U6-MESH)
![Ubiquiti UniFi AP WiFi 6 Mesh Access Point (U6-MESH)]()
![Ubiquiti UniFi AP WiFi 6 Mesh Access Point (U6-MESH)]()
Ubiquiti UniFi AP WiFi 6 Mesh Access Point (U6-MESH)
Available:In Stock
£170.40
Ubiquiti UniFi AP WiFi 6 Mesh Access Point (U6-MESH)
The Access Point WiFi 6 Mesh (U6 Mesh) is a high-performance, four-stream WiFi 6 access point that enables best-in-class signal meshing to improve residential and enterprise network wireless coverage. With its 5 GHz (4x4 MU-MIMO and OFDMA) and 2.4 GHz (2x2 MIMO) bands, the U6 Mesh can achieve an aggregate throughput rate of up to 5.3 Gbps. This access point also supports full 4x4 MIMO with 160 MHz channels, resulting in high-capacity wireless uplinks and quicker data transfer. Because of its IPX5-rated, waterproof casing, the elegant U6 Mesh can be staged anywhere in your home or office, but it's also tough enough to operate reliably outdoors.
Ubiquiti UniFi AP WiFi 6 Mesh Access Point Key Features
High-efficiency 4x4 WiFi 6 (802.11ax)
5 GHz (4x4 MU-MIMO and OFDMA) band with a 4.8 Gbps throughput rate
2.4 GHz (2x2 MIMO) band with a 573.5 throughput rate
Operates at full 4x4 MIMO with 160 MHz bandwidth
Powered with 802.3af PoE (PoE adapter included)
Ubiquiti UniFi AP WiFi 6 Mesh Access Point - Technical Specifications
Mechanical
Dimensions: Ø48.5 x 159.5 mm (Ø1.9 x 6.28")
Weight: 400 g (0.88 lb)
Enclosure material: Plastic, aluminum
Mount materials: Plastic
Weatherproofing: IPX5
Hardware
Management interfaces: Ethernet, Bluetooth
Networking interface: (1) GbE RJ45 port
Button: Factory reset
LED*: White/blue - *Due to chip supply shortages, the U6 AP's LED has been limited to only white and blue color modes.
Power method: 802.3af PoE
Power supply: UniFi PoE switch, 48V, 0.32A PoE adapter (included)
Supported voltage range: 44 to 57VDC
Max. power consumption: 11.4W
Mounting: Wall, desktop, pole mount(included), Ceiling mount (optional)
Operating temperature: -30 to 60° C (-22 to 140° F)
Operating humidity: 5 - 95% noncondensing
Certifications: CE, FCC, IC
Software
WiFi standards: 802.11a/b/g, WiFi 4/WiFi 5/WiFi 6
Wireless security: WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
BSSID: 8 per radio
VLAN: 802.1Q
Advanced QoS: Per-user rate limiting
Guest traffic isolation: Supported
Concurrent clients: 300+
Zero wait DFS: Yes* - *Supported with upcoming firmware versions
Supported Data Rates
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b 1, 2, 5.5, 11 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n (WiFi 4) 6.5 Mbps to 600 Mbps (MCS0 - MCS31, HT 20/40)
802.11ac (WiFi 5) 6.5 Mbps to 3.4 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160)
802.11ax (WiFi 6) 7.3 Mbps to 4.8 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160)
The Access Point WiFi 6 Mesh (U6 Mesh) is a high-performance, four-stream WiFi 6 access point that enables best-in-class signal meshing to improve residential and enterprise network wireless coverage. With its 5 GHz (4x4 MU-MIMO and OFDMA) and 2.4 GHz (2x2 MIMO) bands, the U6 Mesh can achieve an aggregate throughput rate of up to 5.3 Gbps. This access point also supports full 4x4 MIMO with 160 MHz channels, resulting in high-capacity wireless uplinks and quicker data transfer. Because of its IPX5-rated, waterproof casing, the elegant U6 Mesh can be staged anywhere in your home or office, but it's also tough enough to operate reliably outdoors.
Ubiquiti UniFi AP WiFi 6 Mesh Access Point Key Features
High-efficiency 4x4 WiFi 6 (802.11ax)
5 GHz (4x4 MU-MIMO and OFDMA) band with a 4.8 Gbps throughput rate
2.4 GHz (2x2 MIMO) band with a 573.5 throughput rate
Operates at full 4x4 MIMO with 160 MHz bandwidth
Powered with 802.3af PoE (PoE adapter included)
Ubiquiti UniFi AP WiFi 6 Mesh Access Point - Technical Specifications
Mechanical
Dimensions: Ø48.5 x 159.5 mm (Ø1.9 x 6.28")
Weight: 400 g (0.88 lb)
Enclosure material: Plastic, aluminum
Mount materials: Plastic
Weatherproofing: IPX5
Hardware
Management interfaces: Ethernet, Bluetooth
Networking interface: (1) GbE RJ45 port
Button: Factory reset
LED*: White/blue - *Due to chip supply shortages, the U6 AP's LED has been limited to only white and blue color modes.
Power method: 802.3af PoE
Power supply: UniFi PoE switch, 48V, 0.32A PoE adapter (included)
Supported voltage range: 44 to 57VDC
Max. power consumption: 11.4W
Mounting: Wall, desktop, pole mount(included), Ceiling mount (optional)
Operating temperature: -30 to 60° C (-22 to 140° F)
Operating humidity: 5 - 95% noncondensing
Certifications: CE, FCC, IC
Software
WiFi standards: 802.11a/b/g, WiFi 4/WiFi 5/WiFi 6
Wireless security: WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
BSSID: 8 per radio
VLAN: 802.1Q
Advanced QoS: Per-user rate limiting
Guest traffic isolation: Supported
Concurrent clients: 300+
Zero wait DFS: Yes* - *Supported with upcoming firmware versions
Supported Data Rates
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b 1, 2, 5.5, 11 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n (WiFi 4) 6.5 Mbps to 600 Mbps (MCS0 - MCS31, HT 20/40)
802.11ac (WiFi 5) 6.5 Mbps to 3.4 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160)
802.11ax (WiFi 6) 7.3 Mbps to 4.8 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160)
Ubiquiti UniFi AP WiFi 6 Mesh Access Point (U6-MESH)
The Access Point WiFi 6 Mesh (U6 Mesh) is a high-performance, four-stream WiFi 6 access point that enables best-in-class signal meshing to improve residential and enterprise network wireless coverage. With its 5 GHz (4x4 MU-MIMO and OFDMA) and 2.4 GHz (2x2 MIMO) bands, the U6 Mesh can achieve an aggregate throughput rate of up to 5.3 Gbps. This access point also supports full 4x4 MIMO with 160 MHz channels, resulting in high-capacity wireless uplinks and quicker data transfer. Because of its IPX5-rated, waterproof casing, the elegant U6 Mesh can be staged anywhere in your home or office, but it's also tough enough to operate reliably outdoors.
Ubiquiti UniFi AP WiFi 6 Mesh Access Point Key Features
High-efficiency 4x4 WiFi 6 (802.11ax)
5 GHz (4x4 MU-MIMO and OFDMA) band with a 4.8 Gbps throughput rate
2.4 GHz (2x2 MIMO) band with a 573.5 throughput rate
Operates at full 4x4 MIMO with 160 MHz bandwidth
Powered with 802.3af PoE (PoE adapter included)
Ubiquiti UniFi AP WiFi 6 Mesh Access Point - Technical Specifications
Mechanical
Dimensions: Ø48.5 x 159.5 mm (Ø1.9 x 6.28")
Weight: 400 g (0.88 lb)
Enclosure material: Plastic, aluminum
Mount materials: Plastic
Weatherproofing: IPX5
Hardware
Management interfaces: Ethernet, Bluetooth
Networking interface: (1) GbE RJ45 port
Button: Factory reset
LED*: White/blue - *Due to chip supply shortages, the U6 AP's LED has been limited to only white and blue color modes.
Power method: 802.3af PoE
Power supply: UniFi PoE switch, 48V, 0.32A PoE adapter (included)
Supported voltage range: 44 to 57VDC
Max. power consumption: 11.4W
Mounting: Wall, desktop, pole mount(included), Ceiling mount (optional)
Operating temperature: -30 to 60° C (-22 to 140° F)
Operating humidity: 5 - 95% noncondensing
Certifications: CE, FCC, IC
Software
WiFi standards: 802.11a/b/g, WiFi 4/WiFi 5/WiFi 6
Wireless security: WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
BSSID: 8 per radio
VLAN: 802.1Q
Advanced QoS: Per-user rate limiting
Guest traffic isolation: Supported
Concurrent clients: 300+
Zero wait DFS: Yes* - *Supported with upcoming firmware versions
Supported Data Rates
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b 1, 2, 5.5, 11 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n (WiFi 4) 6.5 Mbps to 600 Mbps (MCS0 - MCS31, HT 20/40)
802.11ac (WiFi 5) 6.5 Mbps to 3.4 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160)
802.11ax (WiFi 6) 7.3 Mbps to 4.8 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160)
The Access Point WiFi 6 Mesh (U6 Mesh) is a high-performance, four-stream WiFi 6 access point that enables best-in-class signal meshing to improve residential and enterprise network wireless coverage. With its 5 GHz (4x4 MU-MIMO and OFDMA) and 2.4 GHz (2x2 MIMO) bands, the U6 Mesh can achieve an aggregate throughput rate of up to 5.3 Gbps. This access point also supports full 4x4 MIMO with 160 MHz channels, resulting in high-capacity wireless uplinks and quicker data transfer. Because of its IPX5-rated, waterproof casing, the elegant U6 Mesh can be staged anywhere in your home or office, but it's also tough enough to operate reliably outdoors.
Ubiquiti UniFi AP WiFi 6 Mesh Access Point Key Features
High-efficiency 4x4 WiFi 6 (802.11ax)
5 GHz (4x4 MU-MIMO and OFDMA) band with a 4.8 Gbps throughput rate
2.4 GHz (2x2 MIMO) band with a 573.5 throughput rate
Operates at full 4x4 MIMO with 160 MHz bandwidth
Powered with 802.3af PoE (PoE adapter included)
Ubiquiti UniFi AP WiFi 6 Mesh Access Point - Technical Specifications
Mechanical
Dimensions: Ø48.5 x 159.5 mm (Ø1.9 x 6.28")
Weight: 400 g (0.88 lb)
Enclosure material: Plastic, aluminum
Mount materials: Plastic
Weatherproofing: IPX5
Hardware
Management interfaces: Ethernet, Bluetooth
Networking interface: (1) GbE RJ45 port
Button: Factory reset
LED*: White/blue - *Due to chip supply shortages, the U6 AP's LED has been limited to only white and blue color modes.
Power method: 802.3af PoE
Power supply: UniFi PoE switch, 48V, 0.32A PoE adapter (included)
Supported voltage range: 44 to 57VDC
Max. power consumption: 11.4W
Mounting: Wall, desktop, pole mount(included), Ceiling mount (optional)
Operating temperature: -30 to 60° C (-22 to 140° F)
Operating humidity: 5 - 95% noncondensing
Certifications: CE, FCC, IC
Software
WiFi standards: 802.11a/b/g, WiFi 4/WiFi 5/WiFi 6
Wireless security: WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
BSSID: 8 per radio
VLAN: 802.1Q
Advanced QoS: Per-user rate limiting
Guest traffic isolation: Supported
Concurrent clients: 300+
Zero wait DFS: Yes* - *Supported with upcoming firmware versions
Supported Data Rates
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b 1, 2, 5.5, 11 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n (WiFi 4) 6.5 Mbps to 600 Mbps (MCS0 - MCS31, HT 20/40)
802.11ac (WiFi 5) 6.5 Mbps to 3.4 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160)
802.11ax (WiFi 6) 7.3 Mbps to 4.8 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160)
